ELMACRON VA/V3, Руководство пользователя

Страница: 3 / 15

2
1. INTRODUCTION
VA/V3 water sampler is designed as an all-purpose unit capable of sampling both contamined and clean water
in all kind of industries.
1.1 CONSTRUCTION
VA/V3 water sampler has a robust, splashproof plastic casing with a transparent front cover.
The water sampler is built up of two units: a microprocessor based control unit and a sampling unit who are
built-in in the same casing.
1.1.1 Control unit
The control unit is microprocessor based. All system parameters are entered/changed with the four pushbutton
keys on the front panel. The LCD-display gives you running information during both programming mode and
sampling sequences.
1.1.2 Sampling unit
The sampling unit consists of a sample bottle, in- and outlet tubes and a built-in compressor/vacuumpump,
which lift the water with vacuum.
All components in contact with the samples are made of non-corrosive material.
The sampling unit is easy to dismount for cleaning (see chapter 6.1).
1.2 PARTS
Please check the parts when delivered.
DESCRIPTION
VA/V3 water sampler
Sample bottle Sample bottle, 300 ml
Tubes Reinforced PVC - tube 16/22.5 ( inlet ) ca 2 m
Silicon tube 12/16 ( outlet ) ca 35 cm
Cables 4-wire cable with Amphenol-contact, ca 2 m
2-wire contact for connection to an external alarm unit
Cleaning brush