Elma 718
side 17
Generel specifications
Electromagnetic Compatibility:
Total accuracy = specified accuracy ±2°C(3.6°F)
Sample Rate:
3 seconds per period
Dimension:
184×64×30mm
Weight:
250g Approx.
Accessory:
K Type Bead Probe×2, Battery, Carrying Case, Instruction Menu, Software
program, RS-232 Connection Cable
Power requirement:
9 Volt Battery
Battery Life:
Approx. 100hrs with alkaline battery
AC Adapter:
9VDC ±15% 100mA
Plug Diameter:
3.5mm×1.35mm
Option :
AC Adapter
Warning!
Every time you press "REC" button to start recording data and press "REC"
button again to stop recording, there will be a data set in memory, you can store as many
data sets as you want until memory is full.
Symbol Definition and Button Location:
: This indicates that the minus temperature is sensed.
℃℉
: Centigrade and Fahrenheit indication.
: Thermocouple Type Indication.
: The Maximum value is now being displayed.
: The Minimum value is now being displayed.
: This indicates auto power off is enabled.
: This indicates that the display data is being held.
: The Battery is not sufficient for proper operation.
T1,T2,T3,T4
: It indicates the value below is T1, T2, T3, T4 Temperature sensor.
: It indicates the value below is T1-T2 sensor.
: The reading is now under relative mode.
: This indicates that the tester is recording. If it blinks, it indicates the memory is full.
