Elma laser R107
6
v.211019
19-10-2021 15:31:54
Operation
1
Turn on the instrument by pressing the Power / light ON/OFF pad.
2
Expose the beam capture window of the laser detector towards the direction of the pulsed
Laser Line
3
Slowly move the laser detector in an upward and downward direction until the LCD beam
indicator arrows appear and/or a pulsing audio signal is heard.
4
Move the detector downward when the high laser line indicator arrow is lit (With volume on,
a slow pulsing audio tone is heard). Move the detector upward when the low laser line
indicator arrow is lit (With volume on, a rapid pulsing audio tone is heard). When the line is
level, the center line will be lit (With volume on, a solid audio tone will be heard).
5
If the detector does not detect a signal after 10minutes, the detector will automatically shut
itself off to preserve battery life. Turn the instrument back on using the power button.
6
Press and hold the Power /light ON/OFF key for 3 seconds to shut the instrument off.
SPECIFICATIONS
The type of laser
Green
500~540nm green laser, 10kHz
Bandwidth Sensitivity
±1mm
Dimensions:
140mm
×
70mm
×
26mm
Weight:
120g (without battery)
Readout:
LCD screen,
Power:
2 AAA batteries
