Elma Instruments Elma 43, Руководство пользователя

Страница: 6 / 8

Elma 43 6
English usermanual
Elma 43
Thank you for buying this instrument. Before use, please carefully read the manual to operate it
correctly and maximize the function of this instrument.
Introduction
The Lan Cable Tester (model Elma 43 ) are newly designed and practical tester that can easily test the
correct pin configuration of 10/100/1000 base-T cable, 10 base-2 cable, RJ45 modular cables, AT T
258A cable, EIA/TIA 568A/568B cables and Token Ring Cable etc. by comparing one transmitting end
and the corresponding receiving end.
The
Lan Cable Tester can also test installed cable far away either on the wall plate or the patch panels
by using the remote kit. It is easy to verify the cable continuity, open, short and miss-wired.
Features

Test pin configuration for 10/100/1000 base -T cable, 10 base-2 cable, RJ45 modular cables, AT&T
258A cable, EIA/ TIA 568A/568B cables and Token Ring Cable etc.

Verify cable continuity, open, short and miss-wired.

Test installed cable far away, either on wall plate or the patch panels by using the remote kit.

Auto and manual scan function.

Ground wire test.

Locked status wire function.

Buzzer sound warning for status wire.
Names of parts
1.
IN RJ45 jack for receiving.
2. OUT RJ45 jack for source.
3. Green LED indicators for source.
4. Red LED indicators for receiving.
5.
AUTO scan control button.
6. LOCK control button.
7. TEST button for manual wire test.
8. POWER ON/OFF control button.
9. Red Low battery indicative lamp.
10.
MANU MANUAL scan control button.
11. BATT Low battery control button.
12. Battery cover. (Backside) 9V
Remote unit
13. RJ45 jack for receiving end on remote unit.
14. Red LED indicators for receiving end on remote unit.
15. Red LED indicators for ground wire test on remote unit.
OUT
IN
IN