Elma DT880A
side 8
Alarm clock settings
Press
“ADJ”
key to set the replacement items:
Alarm clock
the whole point timekeeping
Alarm clock, the
whole point of time at the same time open
Alarm clock, the
whole point timekeeping clearance simultaneously.
Detailed description: according to
“MODE”
click to display the
alarm time, and then press and hold
“MODE”
2 seconds, minutes
start flashing in accordance with
“ADJ”
regulation minutes, and then
“MODE”
you
start blinking clock according to
“ADJ”
regulator clock, row by
“MODE”
twice to
confirm.
Open and turn off the alarm:
: This symbol means the alarm clock function is on.
: This symbol means the hourly chime function is on. It will beep two times
hourly.
: These two symbols show in the same time means alarm clock and hourly
chime functions are on.
Date of show
At the current status of the clock click
“ADJ”
automatically display the date, not
three seconds after the exit button.
Maximum/minimum temperature and humidity values showed that
According to
“MEMO”
showed that temperature and humidity memory maximum
(MAX)/minimum (MIN), length by more than 2 seconds to clear memory of
temperature and humidity values.
Environment comfort display
Temperature at 20
C-26
C (68
F-78,8
F), relative humidity at 50%-70% Rh show
between
comfort symbols.
At any temperature, relative humidity above 70% show
sign high humidity.
At any temperature, relative humidity below 50% show
symbols do bath.
Note!
Applicable environment: home, office and places of non-corrosive gas.
Use the ambient temperature range: 0
C-50
C (32
F-120
F)
TG: ver. 1, 02072015
