Elma DT5500A
side 20
English Manual
Digital insolation tester instruction
manual
200k
750V
1000V
Insulation Tester
200
200M
250V
200M
500V
1000V
TEST
CAT IV 600V
IEC61010-1
Safety information
Read the following safety information carefully before attempting to operate or
service the meter.
To avoid damages to the instrument do not apply the signals which exceed the
maximum limits shown in the technical specifications tables.
Do not use the meter or test leads if they look damaged. Use extreme caution when
working around bare conductors or bus bars.
Accidental contact with the conductor could result in electric shock.
Use the meter only as specified in this manual; otherwise, the protection provided
by the meter may be impaired.
Read the operating instructions before use and follow all safety Information.
Caution when working with voltages above 60V DC or 30V AC RMS. Such voltages
pose a shock hazard.
Before taking resistance measurements or testing acoustic continuity, disconnect
circuit from main power supply and all loads from the circuit.
