Elma DT-802D CO2 logger
7
Touchpad keys
Alarm
– Touch to turn on/off the alarm mode.
shows in the display when enabled.
Long press to enter setup mode. The
icon flashes:
1: Use the
▲ and ▼ touch buttons to increase/decrease the limit.
2:
Push the “Alarm” button and the “
GOOD
” and “
NORMAL
” flashes. Press ▲ and ▼ to modify.
When the measured value is less than the displayed, the measured value is “
GOOD
”. When
the measured value is above the displayed, the valu
e is “
NORMA
L”. Touch “
Alarm
” button
again and “
NORMAL
” and “
POOR
” flashes. Press ▲ and ▼ to modify.
When the measured value is less than the displayed, the measured value is “
NORMAL
”.
When the measured value is above the displayed, the value is “
POOR
”.
E
nd setting with “
ESC
” button
MAX/MIN
– Push to toggle between MAX and MIN value. “
MAX
” or “
MIN
” is showed in the display.
Return to normal operation by pushing the “
ESC
” button.
▲ ▼ – Increase and decrease values in different settings.
ESC
– End special modes and settings.
Backlight
– Press the “
Alarm
”, “
MAX/MIN
”, ▲ or ▼ to toggle backlight on.
End with 20 seconds of inactivity or push the “
ESC
” button.
Multiple Datalogger Software.
Download the
DT_802.zip
file from the
Elma
website or use the CD provided with the instrument.
Double-click
Setup.exe
install the program. Insert the supplied USB cable into the
DT-802D
and in a
free USBport on the PC.
NB!
If the
DT-802D
is not in the application - go to the folder where the installer is located and open the
USB driver
folder. Double click on
CP210xVCPInstaller.exe
Set the DT-802D
Start the program and click on the selected data log icon (there can be more connected)
Click on the icon and set the
DT-802D
as shown here.
Click on the icon
and set the
DT-802D
as shown here.
Further information about Multiple data log software can be read by clicking the help icon