Elma Instruments 615A, Руководство пользователя

Страница: 22 / 28

Elma 615A side 22
Buttons
1. Laser/Backlight on/off button
2. Up button (for EMS,HAL,LAL)
3. Down button (for EMS,HAL,LAL) MODE button
(for cycling through the mode loop)
Functional Design
1. In the measuring time , pressing MODE keys to display MAX value, MIN value, DIF
value , AVG value, LOG value.
2. In the measuring time, if the TYPE-K thermocouple is not connected, you can adjust
EMS by pressing up/down key.
3. In the HOLD mode, you can adjust C/F by pressing up/down key
4. You can turn on/off the backlight/laser by pressing LIGHT/LASER key at any state.
5. To set values for the High Alarm (HAL), Low Alarm (LAL) and Emissivity (EMS),
press the MODE button until the appropriate code appears in the display, press the
UP and down buttons to adjust the desired values.
MODE Button Function
In the HOLD mode, Press the mode button also allows you to access the set state, MAX
MIN DIF AVG LOG display, Emissivity(EMS),Lock on/off,HAL on/off, HAL adjustment,
LOW on/off,LOW adjustment,C/F Each time you press set you advance through the mode
cycle.
The diagram shows the sequence of functions in the mode cycle.
MAX MIN DIF AVG display
MAX= maximum .Maximum value of measurement.
MIN= minimum. Minimum value of measurement.
DIF= difference. Difference value of measurement.
AVG= average. Average value of measurement.
Adjustable display by pressing up/down button.
1
3
2
4