Kyoritsu 8035
sid 20
DANGER
●
Confirm a proper operation of the instrument with a well-known power
supply.
●
Warning LED might not light up at live status. (earth potential 70V or
less). Never touch the wire.
●
Voltages may exist when the Live LED is flashing (indicating Earth
phase). Never touch with the wires.
●
Never make measurement on a circuit in which the earth potential
exceeds 1000V to avoid electrical shocks.
●
Do not make measurement when thunder is rumbling. If the instrument
is in use, stop the measurement immediately and remove the instrument from
the measured object.
●
Do not attempt to make measurement in the presence of flammable gasses.
Otherwise, the use of the instrument may cause sparking, which can lead to an
explosion.
●
Keep your fingers and hands behind the barrier on the instrument to avoid the
possible shock hazard.
●
Put insulated protective gears when there is a danger of electrical shock
hazard.
●
The tip of clip is made of metal and it is not completely insulated. Be
especially careful about the possible shorting where the measured object has
exposed metal parts.
●
Never attempt to use the instrument if it's surface or your hand is wet.
Otherwise, electrical shock accident may occur.
●
Never open the Battery compartment cover and the instrument case
when making a measurement.
●
The instrument is to be used only in its intended applications or conditions.
Otherwise, safety functions equipped with the instrument doesn’t work, and
instrument damage or serious personal injury may be caused.
●
Only the qualified person can use the instrument at the secondary side
of high voltage power receiving equipments.
WARNING
●
Never attempt to make any measurement, if any abnormal conditions
are noted, such as broken case, and exposed metal parts.
●
Do not install substitute parts or make any modification to the instrument.
Return the instrument to your local Kyoritsu distributor for repair or re-calibration
in case of suspected faulty operation.
●
Always keep your fingers and hands behind the barrier on the instrument to
avoid the possible shock hazard.
●
Do not try to replace batteries if the surface of the instrument is wet.
Disconnect the clips from the measured conductors first and power off
the instrument before opening the Battery compartment cover for a
battery replacement.
Содержание 5706445250929
Страница 28: ......
