16 of 29
5.3 Operation process for repairing disc
1. Operate the water pump to fill with exit.
Check the condition of supply and drain pipe again.
1) Turn ON the main power switch.
2) Press and hold “ST5” button and “STOP” button with opening the front door.
Water pump starts operation.
3) Stop the pump operation after confirmation the water comes out from the exit.
Operate of water pump is stopped by pushing “STOP” button or “ST1-5”.
CAUTION!
Not filling the water in water supply pipe may be damaged on the disc and pads.
Moreover it may become the cause of error.
2. Set the disc on the turn table. Set the disc so that repair side becomes the top absolutely.
