Elm Plus EPL1020, Инструкция пользователя, Страница: 19 / 24

User Instruction
16
LP (LIQUID PROPANE) GAS SUPPLY CONNECTION
SELECTING A LOCATION
• Always confirm that the burner control knob is in the OFF
position before connecting the gas supply.
• Do not obstruct the flow of combustion air and ventilation air to
the appliance.
To Connect:
1. Ensure that there is no debris caught in the head of gas
cylinder, head of the regulator valve.
2. Insert the nipple of the valve coupling into the cylinder valve
and tighten the black coupling nut by turning it
clockwise with one hand while holding the regulator
with the other hand. (See diagram.)
Hand tighten only.
To Disconnect:
1. Always confirm that the cylinder valve is in the
OFF position before disconnecting the gas supply.
2. Hold the regulator with the one hand and loosen
the black coupling nut by turning it counter-clockwise
with the other hand. (See diagram.)
IMPORTANT
Disconnect the propane cylinder from the regulator
valve when the appliance is not in use.
Always place this outdoor appliance on a hard, level non-combustible surface such a
concrete, rock or stone.
Minimum clearance from unit to combustible materials: 48"(121.9cm) from the top,
72"(182.9cm) from all sides. Do not locate this appliance under any overhead enclosure.
Position the appliance so that you have easy access to the control knob.
Min
.
Clearance
72in.(182.9 cm)
Min . Clearance
48in.(121.9 cm)
Min . Clearance
48in.(121.9 cm)