Ellison AllStar Скачать руководство пользователя страница 11

11

10

AllStar

Limited

Warranty

What Does This Warranty Cover?

This warranty covers any manufacturing 

defects in your Ellison AllStar die-cutting 

Machine (the “Product”).

How Long Does The Warranty Last?

This warranty lasts for 3 years following 

your date of purchase of the Product. You 

should retain your receipt as proof of 

purchase, which may be required in 

connection with obtaining warranty service.

What Will Ellison Do?

Ellison will repair or replace any manufacturing 

defects for Products returned within 3 years 

following the original date of purchase.

What Does This Warranty Not Cover?

This warranty does not cover damages or 

defects caused by misuse or abuse of the 

Product, or use of the Product for commercial, 

rather than personal or institutional, 

applications. Cutting pads and shims are 

excluded from this warranty.

Disclaimers.

ELLISON SHALL NOT BE LIABLE FOR CONSEQUENTIAL 
AND INCIDENTAL DAMAGES, DAMAGES FOR BODILY 
INJURY (INCLUDING DEATH) AND DAMAGE TO PROPERTY. 
THE DURATION OF ANY IMPLIED WARRANTIES SHALL BE 
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY 
SET FORTH ABOVE. SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGE, DAMAGES FOR PERSONAL 
INJURY, OR THE LENGTH OF IMPLIED WARRANTIES, SO 
THESE LIMITATIONS MAY NOT APPLY TO YOU. THIS 
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU 
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM 
STATE TO STATE.

Notices

Warning

Labels

©2008 Ellison Educational Equipment, Inc. All rights reserved.

Product made and instruction booklet printed in China.

How Do You Get Warranty Service?

If you believe that there is a manufacturing 

defect in your Product during the warranty 

period, contact Ellison Customer Service at the 

following telephone number or website:
ellison.com/educators

800.253.2238 toll-free in USA

949.598.8822 outside USA
0871 222 2277 within UK

+44 (0) 845 345 2277 outside UK
A Return Authorization (RA), along with 

shipping information, will be issued. Following 

a determination by Ellison that a fault covered 

by this warranty may have occurred, Ellison 

will: (a) ship you replacement parts or (b) ship 

you a replacement Product. Product not 

covered by this warranty will be returned at 

your expense.

Machine:  

US Patent - D534,932; 

International Patents; other patents pending.

AllStar

is a registered trademark of Ellison 

Educational Equipment, Inc.

Revised: LGL/073008/v1

HITTING HAZARD. KEEP CLEAR OF 
HANDLE ARC AND CUTTING AREA ONCE 
HANDLE IS LOWERED. ALWAYS KEEP A 
FIRM GRIP ON THE HANDLE AFTER EACH 
CUT WHEN RAISING IT BACK UP.

PUSH AND TURN TO LOCK OR RELEASE.

PINCH HAZARD. AVOID PLACING HANDS
INSIDE THE MACHINE.

Содержание AllStar



















Отзывы: