Adjusting the Internally Geared Hub on
the Arc 24
The instructions below are for adjusting the internally
geared hub only. For instructions on how to adjust the
derailleur, please see the section in the owner’s manual.
For a video visit https://youtu.be/Jx
ff
az-HIhk
1. Place the Arc 24 on the kickstand.
2. Using the LEFT side shifter mechanism, shift into
2nd gear.
3. Locate the Click Box on the drive side (right side)
of the rear hub axle.
a.
There is a small clear window on the click box
with two painted, parallel yellow lines. In 2nd
gear, the hub is properly adjusted when the
indicator needle is between the two yellow
lines.
4. Stand on the right side of the bike, facing the bike.
Looking at the indicator in the small window, note
where it is in relation to the yellow lines.
a. If the indicator is above the yellow lines, rotate the
barrel adjuster on the LEFT side shifter unit towards
the handlebars.
b. If the indicator is below the yellow lines, rotate
the barrel adjuster on the LEFT side shifter unit
away from the handlebars.
5. Shift from 1st gear to 3rd gear, back to 2nd
gear to ensure the alignment is correct. If the
alignment is still slightly o
ff
, repeat step 4 until the
indicator is between both parallel yellow lines.
2
3
3a
