One-Revolution Tube Cutter
9
aDjUsTmenT & RePaIR
Replacing a cutter bit.
1. Using an allen wrench, loosen the set screw (item 6) that secures the cutter pin.
NOTE: Tube Cutter models 9060-190 and below use a 5/64 allen wrench & Tube Cutter
models 9060-193 and above use a 1/8 allen wrench.
2. Remove the cutter pin (item 3).
3. Discard the old cutter bit and insert a new bit with the beveled side of the tip up.
4. Replace the cutter pin making certain that the pin is completely through the hole in the
cutter bit.
5. Tighten the set screw.
Diagram 1
