Elliott COLLET STYLE B9765 Pkg, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 6

START-UP
Unpacking
The Elliott Baffle Expander Kit is shipped, complete with baffle expander, hydraulic
ram, hose and pump. On arrival, check for external damage to the cartons. If damage
is found, notify the carrier and the supplier so insurance inspectors can examine the
box before it is unpacked. When opened, check the contents against the packing and
parts list. Report any damage or shortage to Elliott.
Ensure that there is no packaging material left inside the openings of the hydraulic ram
or any other hydraulic port.
Connecting to Hydraulic Power Supply
The Elliott Baffle Expander includes a hydraulic power source. The hydraulic power
source supplied by Elliott will be either Elliott Model M5767-00 (115 Volts) or M5767-
220 (230 Volts). An optional pneumatic pump is available.
1. Position the Elliott Baffle Expander and the hydraulic power source on a flat
surface.
2. Connect the 15’ hydraulic hose to the ram and pump.
3. Follow the directions of the Elliott hydraulic pump manual to assure that the
hydraulic pump is working properly.
4. Cycle the Baffle Expander Ram several strokes to eliminate any air in the
hydraulic lines.
5. The Elliott Baffle Expander Ram is ready for installation of the baffle expander.
Connecting to Baffle Expander (Refer to page 5 – Tool Selection Guide)
1. Thread the threaded bushing (8) into the hydraulic ram. Make sure that the
screwdriver slot is facing outward. Use a screw driver to final thread the bushing
firmly into the hydraulic ram. Set the hydraulic ram aside until step 6.
2. Select and connect the number of 4’ draw bar (5) and collet extensions (7) that will
be required for your task. It is best to insert the draw bar extension into the collet
extensions before assembling extensions together.
3. Thread the collet (3) onto the end of the collet extensions (7).
4. Pull out the end of draw bar extension(s) (5) assembly from the collet extension(s)
to expose the flat. Use a wrench to hold the draw bar extension while threading on
the draw bar (4). Use a second wrench on the draw bar flat to firmly tighten the
draw bar to the draw bar extension assembly.
5. On the opposite end of the collet extension assembly, thread on the collet
extension adapter (2). The complete assembly is now ready to be connected to
the hydraulic ram.
6. Connect the complete assembly to the hydraulic ram by threading the collet
extension adapter end of the assembly into the hydraulic ram. Tighten firmly.
7. Internally thread the draw bar extension into the threaded bushing in the hydraulic
ram. Tighten firmly.
8. The Baffle Expander is now ready to use.
TOOL SELECTION GUIDE
Handle
Bracket
Handle
Assembly
Adapter
Threaded
Adapter
Hydraulic
Cylinder
Hose
Coupling
with Cap
Split
Collar
Name
Plate
Cap Screw
(3- Req’d.)
15’ Hydraulic
Hose
(not Shown)
M5766D1 M5766D2 M5766D3 M5766D5 17RH120 17-9796 212121 P709827-2 P8302-54 80RH303-4
2 3 4 5 6 7 8 9 10 11
Collet Ext.
Adapter
Collet Draw Bar
Draw Bar
Extension
Location
Collar
Collet
Extension
Threaded
Bushing
Set Screw
(2-Req’d.)
* Set Screw
(Not Shown)
B10180D3 B10180D8 B10180D9 B10180D5 B10180D7 B10180D6 M5223-2 128L 128DU
* One required between each Draw Bar Extension.
2 3 4 5 6 7 8 9 10
Short Stroke Hydraulic Ram M5766-00
Collet Style Baffle Expanders
B9765A00 (3/4” Size)
B10180-00 (1” Size)
Collet Ext.
Adapter
Collet Draw Bar
Draw Bar
Extension
Location
Collar
Collet
Extension
Threaded
Bushing
Set Screw
(2-Req’d.)
Set Screw
*
Set Screw
(Not Shown)
B9669D2 B9765AD6 B9765AD7 B9765AD8 B9765D9 B9765D11 M5223-5 128L 173AY 173AX
* One required between each Draw Bar Extension.
2 3 4 5 6 7 8 9 10 11
.750 – 16UNC
2.750 – 16UNC
.875 – 14UNF
Collet Expander
Connection
.500 – 20UNF
Threaded Bushing/
Draw Bar Connection
Page 4 Elliott “Collet Style” Baffle Expander TM-37 TM-37 Elliott “Collet Style” Baffle Expander Page 5