elliot 5224XL, Инструкция по эксплуатации и техническому обслуживанию, Страница: 6 / 18

6
5224XL & 5224XLBMC
tool off immediately and have the problem corrected before further use. Do not use a
damaged tool. Tag damaged tools “Do Not Use” until repaired. A damaged part should
be properly repaired or replaced by an Elliott service facility. For all repairs, insist on
only identical replacement parts.
• Keep Hands Away from All Moving Parts.
• Do Not Overreach. Maintain Control. Keep proper footing and balance at all times.
• Stay Alert. Watch what you are doing, and use common sense. DO NOT use a
tool when you are tired, distracted or under the influence of drugs, alcohol or any
medication causing decreased control.
• Unplug Tool. Unplug tool when it is not in use, before changing accessories or
performing recommended maintenance.
• Maintain Tool Carefully. Keep tools sharp and clean for best and safest performance.
Follow instructions for lubrication, maintenance and changing accessories. For
more information see “Maintenance” section. Periodically inspect the tool cord and
extension cords for damage. Have damaged parts repaired or replaced by an Elliott
service facility.
• Store Idle Tools. When not is use, store your tool in a dry, heated, secured place. For
more information see “Maintenance” section.
• Maintain Labels and Nameplates. These carry important information and will assist you
in ordering spare and replacement parts. If unreadable or missing, contact an Elliott
service facility for a replacement.
SAFETY GUIDELINES