USE
What to do before first use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your seller immediately.
• Only connect the appliance to a mains socket with the mains voltage indicated on the rating plate.
• When disconnecting the power cord from the power outlet, pull only on the plug. Never pull on the cord.
• During the first few minutes of the first use, you may notice a little smoke and a slight smell. This is normal and will soon
disappear.
• Be aware that some surfaces may become hot. Do not touch and supervise others accordingly. The unit is VERY HOT when in
use. Take care to avoid contact between the hot surface and bare skin, particularly around the ears, face and neck when in use.
INTENDED USE
Warning! Only use the device externally.
• The appliance is only intended for drying and styling human hair.
• Any improper use can be dangerous!
• Preparing the hair: Wash your hair and dry it well. Comb your hair thoroughly. Do not use hairspray or other flammable
chemical hair care products.
• Unwind the power cable and plug into the mains socket and switch on.
• Set the On/off switch to required settings (1, 2 or 3)
- Position 1 is for cold air
- Position 2 is for Medium heat
- Position 3 is for High heat
• Divide your hair into sections. Using the hot air styler direct hot air through a section of hair at a time. Move hot air styler
steadily across each section so that hot air passes through hair. Direct air flow at hair, not scalp.
• Keep hot air styler’s air intake vents unobstructed and free from hair.
• To avoid over-drying, do not concentrate heat on any one section for any length of time. Keep the hot air styler moving as you
style.
• For quick styling, dampen hair with a mist of water before styling with the hot air styler.
• When using the hot air styler to create curls and waves, dry hair almost completely on the warmest setting, then finish styling
using the lower setting. This will set the style in your hair.
• When you have finished, set the On/Off switch to the off (0) position.
• When you are finishing styling, switch off the appliance, unplug the appliance and allow it to completely cool down before
cleaning or storing.
HELP AND ADVISE
If the hot air styler does not work:
• Make sure it is plugged into the main supply and switch on.
• Make sure the ON/OFF button is on.
• Check the fuse in the plug.
If the hot air styler still does not work properly, refer to your authorized service agent.
CLEANING
Unplug the appliance and allow it to cool down. Use a soft, slightly damp cloth to wipe the appliance surfaces. Do not allow
water or any other liquid to get into the unit. Care should be taken not to touch this part of the appliance when it is switched
on our just after it has been turned off. ALLOW AT LEAST 30 MINUTES TO COOL DOWN BEFORE PUTTING AWAY.
4
5
