31/32
TC680-IP
3. FAQ
Password recovery
1. Open the camera case.
2. Press and hold the pointed orange button.
3. Power on the camera then release the button after 30 second from power on.
4. Camera will restore to factory default, login to the camera’s web administration page for future setup.
I can’t see anything in IE even my computer hardware meets minima requirement.
Please install Microsoft® DirectX®.
How can I change language if I am not able to see the administration page?
For an example of IP address 192.168.1.217:
http://192.168.1.217/SetLanguage.cgi?Language=0
English
http://192.168.1.217/SetLanguage.cgi?Language=1
Chinese
How come the camera network functions are not able to perform properly?
Please make sure you have correct configuration on IP table such as DNS, subnet mask and IP address.