Elkron SD610, Инструкция по установке, программированию и функциям

Страница: 12 / 16

12 DS80SD9Z-002
Installation
Mounting the Smoke Detector
Step 1. Place the Smoke Detector at desired mounting location and use the Range Test function to make sure the Smoke
Detector can be received by the Control Panel at mounting location.
Step 2. Take out the mounting sheet included in the package. The picture’s size equals the Smoke Detector’s actual size
and the perforated design allows for easy tear-off after installation.
Step 3. Position the sheet tight against the ceiling and use the four holes as template to drill holes and insert wall plugs if
required. Ensure the wall plugs are flush with the mounting surface.
Step 4. Place the mounting bracket on top of the mounting sheet and screw it onto the wall. The bracket provides
bidirectional flexibility. Users can either rotate the bracket clockwise or counterclockwise to lock the hook.
Step 5. The Smoke Detector has three notches on its back cover for easy identification.
Step 6. Hold the Smoke Detector with extra care and align the three notches with the hooks on the mounting bracket.
Step 7. Rotate clockwise to lock the hook.
Step 8. Installation is now complete. You can now tear off the mounting sheet.
Technical specifications

Smoke detection: in photoelectric chamber

Sensor of temperature

Power supply: 3 batteries CR123A 3V

Battery life: 10 years

Two-way radio frequency: 868 MHz

Maximum radio power transmitted: 14dBm

Sound level of the internal siren: 85dB/3m

Working temperature range -10°C – +45°C

Dimensions: 105 mm X 105 mm X 41 mm

Weight: 100g

EN14604 certified
ELKRON
Tel. +39 011.3986711 - Fax +39 011.3986703
www .elkron.com – mail to: info@elkron.it
ELKRON is a trademark of URMET S.p.A. Via Bologna 188/C –
10154 Torino (TO) Italy
H U
www.urmet.com
U H
MADE IN TAIWAN