Once settings have been changed, you much Activate Configuration for the changes to
take place.
11.
Once the settings have been activated, the device will reboot. You may place the device
on the intended LAN/subnet. Ensure you can ping the device from a command prompt.
Additionally, the configuration web page may now be accessed via the newly assigned IP
address (provided it is on the same LAN).
12.
The device is ALWAYS accessible at IP address 192.168.88.89, therefore, if the device
cannot be reached using the new settings, or is in an unknown state, repeat steps 1-10
to reset to a know IP configuration.
Device Password
For security purposes, it is recommended to change the device password.
HOWEVER note that the password is not recoverable by ANY means.
This means that if the password is lost, it is impossible to retrieve, even at the factory.
