Page 8
III. C
ONTROL
S
YSTEM
S
PECIFICATIONS
Handheld Transmitter Specifications
•
Input power
2 AA batteries (Lithium recommended)
•
Output power
Meets FCC part 15 requirements for license free
operation
•
Transmitter dimensions
6” x 3 1/4” x 1 3/8”
•
Transmitter weight
10 ½ oz.
•
Operating temperature range
-40
F to 150
F (-40
C to 65
C)
•
FCC ID
QT8PTSS2011
Joystick Transmitter Specifications
•
Input power
12/24 VDC (11VDC to 30 VDC)
•
Output power
Meets FCC part 15 requirements for license free
operation
•
Transmitter dimensions
Joystick: 4 3/4” x 4 11/16” x 10 5/8”
•
Operating temperature range
-40
F to 150
F (-40
C to 65
C)
•
FCC ID
QT8PTSS2011
RF Receiver/Control Module Specifications
•
Power requirements
12VDC (11-30VDC) at the controller under full load
•
RF Receiver/Control Module dimensions
•
Control current
16 1/4” x 10 1/2” x 3 3/16”
0.15 A
*
•
Operating temperature range
-40
F to 176
F (-40
C to 80
C)
Table 1
Motor Current Specifications
Monitor
Left/Right
Up/Down
Nozzle
Run I
2 A
2 A
0.5 A
Stall I
12 A
14 A
NA
Current Trip Point
9.2 A
8 A
4 A
Shock:
•
30 G's (55 Hz. @ .2 inch double amplitude)
Vibration:
•
15.5 G's (55 Hz. @ .05 inch double amplitude) continuous operation
Drop Test:
•
Both the transmitter and RF receiver/control module must meet operating specifications after drop from
1-meter height onto concrete surface.
Environmental:
•
NEMA 4 rating (except 81498001 Joystick Assembly) (must withstand a 1 inch stream of water (65
gpm) from a distance of ten feet for five minutes, with no water entering the enclosure).
*
All current ratings are at 12 volts
