Elkay LBWD00XXC Скачать руководство пользователя страница 7

(630) 574-8484 

Elkay Manufacturing Company 

1000005232 (Rev. A - 04/19) 

 

Built-in Filtered Water Dispenser

WARNING

Contacting live electrical wiring with 

power tools or hand tools can cause 

serious injury or death.  

•  Make sure all related circuit breakers are turned 

OFF.  

•  Test for live circuits or wiring inside any wall 

where installation of the product requires cutting 

into a wall. 

  

 Prior to any maintenance, make sure the 

unit is disconnected from the power 

source and the circuit breaker is turned 

OFF.

  

Prior to installation, test for live circuits or 

wiring inside the wall before cutting or 

drilling into the wall. Before working near 

any electrical circuit or wiring, remove all power and 

use a circuit tester to verify the power has been 

disconnected. Contact with live electricity can cause 

serious bodily injury and in some cases death.

CAUTION

These cautions indicate a potentially hazardous 

situation which, if not avoided, may result in minor 

or moderate injury. Follow all instructions related to 

installation and/or maintenance of this product.

Tripping Hazard

 

 

Personal injury can result from tripping over 

power cords, tools, or other installation items. 

DO NOT leave items laying around the work area.

Cutting Hazard 

 

The installation of this product requires using 

power tools. 

Keep hands away from the cutting edge of any 

tool used in the installation of our product. 

Placing fingers in or around the cutting blades 

could result in serious personal injury. 

Use Proper Tools

 

 

Always use proper tools which are in good 

working condition during the installation of the 

product.

2.4  Property Damage

NOTICE

Inspect Before Cutting

 

 

Make sure no electrical wiring or plumbing is 

present before cutting into a wall.

3. Installation Preparation

NOTICE

The installation of this product 

requires electrical and 

plumbing connections that use specific skills and 

knowledge. If you are unsure or not qualified to make 

these connections, consult a qualified plumber, 

electrician, or installer for this installation. 

Professional installation is recommended.

3.1  General Information

1.  This water dispenser is designed for indoor use only 

and should not be installed outdoors or in a humid 

environment. This water dispenser should not be 

installed on exterior walls.

NOTICE

A water supply pressure below 

40 psi will result in decreased 

water flow through the unit and damage to the 

product.  A pressure above 105 psi will also cause 

damage to the product.

2.  Make sure the water supply pressure to the product 

is between 40 and 105 psi. The water dispenser with 

filter requires 40 psi minimum water pressure.

3.  Use care when opening and removing the packaging 

to prevent damage to the product.

a.  Inspect the product for any shipping damage and 

report it immediately to the location of purchase. 

Installation of a damaged product will void the 

warranty. 

b.  Confirm that all parts have been included for the 

proper installation of this product. Contact the 

location of purchase if damaged parts are found.

NOTICE

Make sure no electrical wiring, 

potable water inlet pipes, or 

drain water outlet pipes will be damaged during 

installation of the product. Damage to any of these 

items can cause electrical damage, fire, and/or water 

damage.

4.  Shut off the water supply source and disconnect 

power to the electrical circuit being used to operate 

the product before starting the installation.

Содержание LBWD00XXC





















Отзывы: