background image

ER2_1G   ER2_2G         

(630) 574-8484 

 

Elkay Manufacturing Company 

2000000700 (Rev. A - 07/22) 

 

Page 5

Use Proper Tools

 

 

Always use proper tools which are in good 

working condition during the installation of the 

product. Using tools other than those listed 

could adversely affect the product and could 

result in property damage.

Failure to follow these instructions could 

result in personal injuries, water damage, and 

other damage to floors, pipes, walls, and other 

portions of your building or home.

1.5 Property Damage

Inspect Before Cutting

  

Make sure no electrical wiring or plumbing 

is present before cutting into a wall.

2. General Information

2.1  Installation / Use & Care

Read all instructions carefully before starting the 

installation and familiarize yourself with the various 

parts of this product.

Remote Water Chillers are designed to reduce the 

temperature of potable water that is routed through 

the water chiller. This chiller is meant to be installed in 

a properly ventilated, non-visible location.

This manual contains installation, Use & Care 

instructions for the ER2 series Remote Chiller units. 

Followed carefully, these instructions will result in 

trouble-free installation of this Elkay Manufacturing 

Company (Elkay) product.

Any deviations, additions, and/or deletions from the 

described methods, without prior written approval of 

Elkay, will void the warranty covering this product. 

Make sure the installation and use of this product 

meets all local, state, and federal plumbing and 

electrical codes.

Unit must be installed properly by trained service 

person.

2.2  Disclaimer

The information contained in this Installation / Use & 

Care Manual is given free of charge. It is based upon 

technical data which we believe to be reliable and is 

intended for use by persons having knowledge of this 

technical area at their own discretion and risk. Elkay 

assumes no responsibility for results obtained or 

damage incurred from the use of this material either in 

whole or in part by the buyer.

2.3  Serial Number Location

Please use the serial number located on the Remote 

Chiller unit when contacting us with questions 

concerning the installation of this product. 

 

2.4  Contact Information

General Information 

Elkay Manufacturing Company 

1333 Butterfield Road, Suite 200

 

Downers Grove, IL 60515
Phone: 630.574.8484

 

Email: [email protected] 

Website: http://www.elkay.com 

USA/Canada Customer Care  

Phone: 800.476.4106 

 

Email: [email protected]

International Customer Care  

Phone: 630.575.4755 

 

Email: [email protected]

Installation Services 

Phone: 800.952.8064

 

Email: [email protected]  

Website: http://www.elkay.com/contact-us/install 

2.5  Notice of Changes

The information, specifications, and illustrations in 

this manual are based on the information that was 

available at the time this material was written and 

can change at any time. In keeping with our policy of 

continuing product improvement, Elkay reserves the 

right to change specification without notice. 

All dimensions are given in inches (") and millimeters 

(mm).

2.6  Warranty

This product is covered by a Limited Warranty and 

Elkay will not be held responsible for damage of any 

kind in connection with the installation of the product.
Refer to the Elkay website http://www.elkay.com

Содержание ER2












Отзывы: