INSTALLING SINK (CABINETS 27 INCHES WIDE)
5. Insert fasteners loosely, all around the sink.
6. Using a good quality silicone caulk, apply a bead
evenly all around the top of the sink flanges.
7. Position and align sink under the countertop
opening. Press silicone onto countertop.
8. Tighten fasteners until the sink is snug against
the countertop.
9. Check alignment of sink to countertop opening.
10. Tighten down fasteners evenly. Be careful not
to overtighten. Remove excess silicone.
Installation Instructions
Installation profile for ELUH
models for 27” wide cabinets
(FRONT INSTALLATION VIEW)
COUNTERTOP
1/2” PLYWOOD
OR UNDERLAYMENT
CABINET WALL
OPTIONAL RECESS IN
PLYWOOD (OR
UNDERLAYMENT)
COUNTERTOP
1/2” PLYWOOD
OR UNDERLAYMENT
CABINET WALL
FASTENER (AS REQUIRED /
NOT FURNISHED)
OPTIONAL RECESS
IN PLYWOOD (OR
UNDERLAYMENT)
SILICONE CAULK
(NOT FURNISHED)
1. Position template on countertop. Locate the
template front to rear and left to right, so that sink
will not interfere with the cabinet.
2. Trace a line around the template. Cut along the
inside of this line to provide opening.
3. Cut an opening in a sheet of plywood or
underlayment. The size of the opening should
be the same as the one in the countertop.
(Optional: Create a recess in the sheet in which
the sink rim can sit. See graphics below.)
4. Place the sink and plywood (or underlayment)
under the countertop.
PLYWOOD/UNDERLAYMENT
OPTIONAL RECESS DIMENSIONS
1/32 (.031”) MAX
9/16”
