Important Information
Safety Instructions
When correctly installed in compliance to installations and adhering to all current electrical, mechanical
and manufacturer regulations, your automation system will provide a high degree of safety and
problem free operation.
Please take note of the following warnings that must be followed in order to prevent accidents during
your gate’s operation:
• Do not allow children to play near the gates.
• Keep all remote control operating devices out of the reach of children.
• Do not pass through the gates whilst in operation. Wait until the gates are fully open before
passing through.
• Do not stop unnecessarily when passing through the gates.
• Do not operate the gate(s) by remote control unless the gate(s) is in view.
• Do not attempt to block or interfere with the gates movement during operation.
• Under no circumstances should you attempt to modify the gates or automation system.
• Ensure that your automatic gates are serviced at 6 month to 12 month intervals (dependent on
number of openings) by your installation/maintenance company.
• Report any signs of malfunction to your installation/maintenance company immediately.
• In the case of malfunction, isolate the power supply, release any additional locking mechanism,
manually open the gates (see instructions inside manual) and call your installation/maintenance
company.
• If you are in any doubt regarding the operation of your gate, call your installation/maintenance
company.
