Lift the fully extended handle
upwards enough to allow the rear
support section of the frame to
join with the handle assembly as
per the photos.
Once again press either or both
of the Red Levers to lock the two
sections of the frame together.
The golf buggy is now fully
erected and ready for use.
Fitting the Seat Mount Bar
– remove the Seat Mount Bar
from the box and remove the protective wrapping.
You will notice the seat mount bar has a label affixed showing
which way up it should be fitted to the frame.
Slide the Seat Mount bar into the
frame. For your convenience,
provision has been made to fit the
seat to either side of the buggy.
