M1XSLC Installation Manual -
LUTRON HOMEWORKS QS
Page 7
LUTRON HOMEWORKS QS
3.7
Login Prompt and Reply
- The IP232 has the ability to make a telnet connection that is secured with a Username and
Password. This is a requirement for connecting to a Lutron Homeworks QS Processor. The IP232 configuration utility allows
full customization of the prompts and the responses for these security challenges.
IMPORTANT: The precise wording of each challenge and response must be known and entered into the spaces provided.
Listed below are the default prompts and responses that were known to be used by Lutron at the time this manual was printed.
Below are the Login prompts and the
replies shown in BOLD.
For "Prompt for User Name" enter:
login:
For "Prompt for Password" enter:
password:
For "User Name" replay enter:
lutron
For "Password" reply enter:
integration
Note: Password will be hidden unless
the Show box is checked.
All characters are lowercase.
Be sure to include the colon " : " after
the login and password entries.
3.8
The completed configuration should look similar to the above with the exception of the actual IP addresses.
3.9
Click
Send Settings (To IP232)
to program all of these settings into the ELK-IP232.
3.10
We suggest saving the configuration to hard disk or a thumbdrive for later retrieval.
Click
Save Settings (To Disk)
.
3.11
Click
Close
when done.
