Main User Screen
MENU Screen – Synchronise
If programming changes are made to M1 then a
manual Synchronise should be performed to update
any Area, Tasks, Lighting, Outputs and Function (F)
Key names. On the Main Screen press “MENU”, then
“Next Page” to locate the Synchronise button.
Press “Synchronise” and then “START” to
synchronise and upload all the names.
Once this is complete press the red “X” button on the
top right corner of the screen.
MENU Screen – “Information”
Contact information for the Installation Company may
be entered and stored in Navigator to provide the
customer contact information for system expansions,
future sales or customer service. This screen is
displayed whenever the “Information” button is
pressed on the Menu Screen.
The Installer Information can ONLY be edited from
the Installation Programming Menu accessible using
the Installer Program Code.
To return to the Menu screen press the “MENU”
button. To return to the Main User screen press the
red “X” or the “Exit Menu” button.
Installer Programming
To use Navigator for programming the M1 Control
press the “Installation Programming” button on the
Main Menu screen. Installer Programming Menus are
organized on 2 pages. Detailed information about
programming for M1 can be found in the M1
Installation & Programming Manual.
Navigator is proudly designed and manufactured in
Australia for Elk Products by Ness Corporation.
ELK Products, Inc.
PO Box 100
Hildebran, NC 28637 USA
www.elkproducts.com
L634 1/10/12
ELK-M1KPNAV Touchscreen Keypad
Specifications, Installation, and Setup
Introduction
Navigator is a stylish new Touch Screen Keypad for
use with the M1 Control System. It features a touch
sensitive 3.5” LCD Color display with bright, easy to
use graphic icons and softkeys. Connection to M1
panel is via the RS485 bus, making it simple for new
or retrofit installations. Navigator makes the M1
Control System extremely easy to operate.
FEATURES
•
Hi-Contrast LCD Touchscreen Display
•
Six (6) Programmable Function Keys
•
Unique “Menu” Navigation
•
Operates on 4-wire RS485 Data Bus
•
Built-in Piezo Sounder with Adjustable Pitch
•
One (1) Supervised Zone Input
•
One (1) “Switched Positive” Voltage Output
SPECIFICATIONS
•
Screen Size: 3.5” Diag.
•
Resolution: 320 x 240 pixels – Landscape
•
Connection: 6 Pin Plug-in “Flying Lead” Cable
•
Operating Voltage: 13.8 VDC
•
Current draw: ~30mA Idle (Back light on low,
sounder Silent.) ~ 55 mA fully active.
•
Dimensions: 4.25”W x 3.38”H x .59”D
•
Color: Silver back plate with white front bezel
(Black or Silver front bezels sold separately)
Features & Specifications subject to change without notice.
