Elk EIk-M1KPNAV, Руководство пользователя

Страница: 22 / 28

Your system may be configured to allow control of multiple areas (e.g.
Office, House, Garage etc). This allows a part of the system to be Armed,
while others are disarmed. The “Select Area” and “Change Keypad Area”
screen works as follows with two types of multiple area control.
1. Temporary Map another Area -
Press the desired Area from the list
and then press “Change Area”. In
the example shown, if your Navigator
keypad normally controlled Area One,
you could temporarily change it to
control Area Two or Area Three.
All keypad functions of Area 2 or 3 will
be available, including arm, disarm,
F-Keys, etc., displaying just as if it
were primarily assigned to that area.
After 1 minute of no key presses the keypad will return to display its
primary assigned area.
2. Collectively Control all Areas -
Press the Control All Areas button.
This displays the Arm and Disarm of
all areas that are available to the
User based on the User Code
entered. It permits the state of each
available area to be changed. This
does NOT map to full functionality like
option 1.
To change the status of any Area
while in this mode, simply click on the Area from this screen and the Area
will change its state from Arm / Disarm or visa versa. This also allows for
multiple Areas to be selected to be changed from the one screen.
To return to the Main Menu press Menu . To return completely back to the
Main screen press EXIT of the red close button on the top right of the
screen.
(This Option requires entry of a valid User Code)
Select Area