03
STEP 1: Support Pillar Installation
Put Base (
①
) on the table; put washer (B) and M6×30mm bolts (A) on the base; put Plastic Cover (D) and
Support Pillar (
②
) under the base, keep clip holes toward backside.
Then tighten the bolts (A) with the 4mm allen key (H).
Table
Checklist
②
(x1)
Support Pillar
A (x3)
Bolt M6×30mm
B (x1)
Washer
D (x1)
Plastic Cover
H (x1)
4mm Allen Key
①
(x1)
Base
Checklist
G (x4)
Foot Pad
Tear off plastic film of Foot Pads (G), then attach Foot Pads (G) near four conors of the Base(
①
) bottom.
STEP 2: Apply Foot Pads to the Base
①
G
Table
A
B
①
D
②
H
Note:
Support Pillar should be
placed with clip holes
facing backwards.
