Elium Elipsus CI 230 C YUV, Руководство по эксплуатации, Страница: 25 / 56

Installation
3.2 Antenna only DVB-S
The Elipsus is programmed for Astra Satellite but you can set up the antenna
installtion as well as the channel search for other satellites.
▪ To move between the input windows press
the Up and Down button (7).
▪ To change the settings of an input window
press the Plus/Minus button (8).
▪ If you use only one LNB you have to select at
the option LNB Connection: Direct.
Otherwise if you use several LNB or several
Antenna connected to a Multiswitch you have to
assign to each seperate LNB or Antenna an own
DiSEqC connection.
The following illustration shows you an example:
For the correct set up of the above illustration you have to adjust the following
parameter.
▪ Select the satellite you want to receive.
▪ Select the LNB Number for example: Antenna 1 correspond to LNB Number
1, Antenna 2 correspond to LNB Number 2 .....
▪ Select the DiSEqC for example DiSEqC A correspond to Sat System A,
DiSEqC correspond to Sat System B .....
▪ Press the Menu button (11) to save the parameter.
Example: Hotbird - LNB number 2 - LNB connection DiSEqC B and Astra
- LNB number 1 - LNB connection DiSEqC A. After correct set
up you will see after some seconds the signal quality shown at the
OSD.
24