6
Secure the tail skid into the fuselage with CA glue.
Electronics Installation
Locate the following parts:
1 x Ballast
1 x Motor Mount
1 x 2212-1250KV Motor (
Not included
)
1 x 30A ESC (
Not included
)
1 x Battery (
Not included
)
1 x 10*5 Prop (
Not included
)
4 x Washer
4 x Motor Mount Screw
4 x Motor Mount Blind Nut
We recommend using folding props if you are a
beginner.
Drill through four pre-cut holes on the nose with a
3mm diameter
drill bit
.
Secure the motor mount onto the fuselage with four
motor mount screws. Then tighten them with four
nuts.
Install your motor onto the motor mount. Connect
the ESC to your motor.