Elitegroup Computer Systems P6EX-A+, Руководство пользователя

Страница: 63 / 78

P6EX-A+ User’s Manual
4: Reference Information – 4.25
Video Off After
This governs when the video display gets turned off. The op-
tions are:
Suspend Off after system enters Suspend mode
Standby Off after system enters Standby mode
Doze Off after system enters Doze mode
N/A No display shut off
Modem Use IRQ
This tells the system which IRQ a modem connected to the it
is using. The default is IRQ3, which is for the COM2 serial port.
The system uses this setting to know to respond to a modem ring
and wake up the system when it is in Suspend mode. If you in-
stall a modem in or connect one to the systemand it does not use
IRQ3, set this line to the IRQ the modem is using.
Doze Mode
This sets the period of system inactivity after which the sys-
tem goes into Doze mode, the most limited power saving state.
The settings range from 1 minute to 1 hour and can be set manu-
ally when power management is in User Define mode. The de-
fault setting is Disabled. When the system goes into power sav-
ing mode, power management will skip to the next mode in the
sequence if this is disabled.
Standby Mode
This sets the period of system inactivity after which the sys-
tem goes into Standby mode, the intermediate power saving state.
The settings range from 1 minute to 1 hour and can be set manu-
ally when power management is in User Define mode. The de-
fault setting is Disabled. When the system goes into power sav-
ing mode, power management will skip to the next mode in the
sequence if this is disabled.