ELITEFOUR JC 582, Руководство пользователя

Страница: 13 / 24

13
PROGRAMMING
MODE SETTING
Pressing the Mode button will cycle through the controller’s available programming modes and
settings: ON Mode, OFF Mode, TIMER Mode, AUTO Mode (4 triggers), ALARM Settings (4 settings).
ON MODE
In this mode, the fan will heat continuously
regardless of temperature or humidity. Use this
mode to set the fan's maximum blowing strength,
ranging from 0-10, when triggers are activated.
OFF MODE
In this mode, the fan will not run regardless
of temperature or humidity. Pushing the up or
down button will change the display’s brightness,
ranging in 1/2/3/A3. On setting A3, the display
will dim its brightness down to 1 if the device is
left unattended for 30 seconds. Holding the up or
down button will change the display’s units to F or
C, respectively.
TIMER MODE
In this mode, pressing the up or down button will
set the timer. The fan will ramp up to ON Mode’s
setting until the timer’s clock runs out. It will begin
spinning 5 seconds after the timer is set.
Leaving the timer mode while it’s running will
pause it until you return to this mode.