Elite VELOCITY, Руководство пользователя

Страница: 8 / 18

________________________________________________________________________
P a g e | 8
6. MAINTENANCE INSTRUCTIONS
Maintaining your EAB will ensure you get the best out of your bike each and every time you ride
it. There is not much more to maintaining an EAB compared to a regular bike. You can have
your bike serviced at a dealer or do it yourself.
Before Every Ride
Conduct a visual inspection for mechanical integrity as well as any wear or damage. Check to
ensure your battery is fully charged and your front and rear lights are operable.
.
Every 150kms (100 miles)
Clean your EAB. Clean and lightly oil the chain and gears. Do not use a steady direct stream of
water on any of the electronic components. Use a cloth to avoid short-circuiting your motor,
battery, controller or any other electrical components. Your EAB comes with a factory paint
finish and can be cleaned with a mild detergent.
Repairing a Punctured Tire on the Motor Wheel.
If you need to remove the wheel containing the motor housing, follow these steps:
1. Unplug the quick connects.
2. Loosen the wheel nuts enough to slide the wheel out of the wheel drop-outs.
3. Remove the chain from the gear cassette as you remove the wheel.
4. Be careful not to rest the wheel against the electric input cable.
5. Be mindful of the tightening assembly sequence of washers, nuts and spacers.
Hub Motor and General Maintenance
Although the motor is maintenance free, we recommend a thorough inspection of your bicycle
after 5,000 km (3,000 miles) of cycling by a reputable bike shop specializing in EAB’s.