Elite Steam humidifier, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 24

4
1: Remove Humidifier
From Box And Open
Twist GeneralAire brand badge on the front
cover of the cabinet to uncover the hidden
capture screw underneath the right side.
Remove capture screw using a phillips
screwdriver. (take care not to lose the screw)
Lift cabinet front cover upward about 1” and then
pull forward to remove.
Your Elite Steam humidifier will consist of:
For duct mounted applications:
1 - Steam humidifier unit
1 - Duct steam nozzle
6' - 7/8" ID steam hose
2 - Steam hose clamps
7' - 5/16" ID condensate hose
1 - Condensate hose clamp
1 – 800 UST Saddle valve kit
1 – Wall / Duct Mount Humidistat
1 – 12500 Air Pressure Switch
1 – Water supply tube kit
3 - Screws and anchors
1 - Fill connector
1 – 10’ coil low voltage wire
For room mounted applications:
1 - Steam humidifier unit with blower attached
1 – 800 UST Saddle valve kit
1 – Wall / Duct Mount Humidistat
1 – Water supply tube kit
3 - Screws and anchors
1 - Fill connector
1 – 10’ coil low voltage wire
IMPORTANT: BEFORE beginning installation:
Check for shipping damage to cartons. Mark the shipping waybill accordingly.
Open cartons and check for any hidden damage. Mark the shipping waybill accordingly.
Check packing slip to insure all items have been received. Notify General Filters, Inc. within one
week of any shortages or damaged parts.