KNOW YOUR COFFEE MAKER
….
Tank
Tank cover
Funnel
Filter
Strength controller
Carafe lid
Carafe
Keeping warm plate
Handle
Control panel
(see below)
Funnel support
CONTROL PANEL
RUN
AUTO
HOUR
MIN
PROG
ON OFF
12:00
BEFORE FIRST USE
….
Check that all accessories are complete and the unit is not damaged. Add clean water up to
MAX level to brew several times without coffee according to the steps below, then discard
the water. Wash the detachable parts thoroughly with warm water and dry thoroughly.
USING YOUR COFFEE MAKER FOR THE FIRST TIME:
SETTING THE CLOCK DISPLAY
When first using your coffeemaker, plug the power cord into an electrical outlet. The digital
display will automatically indicate [12:00].
NOTE:
Please note that the clock display will be displayed as a 24-hour clock which means
1:00pm will display as [13:00] or 3:00pm will display as [15:00].
1) Press ON/OFF button two times, the right AUTO indicator light will illuminate.
2) Press PROG button one time, the word CLOCK is showed at the up-right corner on
display.
3) Press the HOUR and MIN button continuously to set the
clock’s present time (real clock)
For example: Real time is [8:10] (See fig. 1)
4) Once the Clock has been set, after a few seconds the word
CLOCK will disappear from the corner.
5) Your real-time clock has been set.
PROGRAMMING AUTOMATIC START-UP
1) Press PROG button two times and the word TIMER shows on
up-left corner of display.
2) Set the delayed starting time by pressing HOUR button and
MIN button repetitively, that is 13:00 (see Fig. 2). After about
10 seconds, the LCD will display the current clock. You may
see the automatic start time by pressing PROG.
3) When the time is due the AUTO indicator light will shut off, and the RUN indicator light
will illuminate and the unit will begin brewing. The appliance will cut off power
automatically after
two
hours if it has not been manually disconnected at the
completion of brewing.
Note:
You may cancel the automatic start function by pressing ON/OFF. If you want to
change the automatic start time, only following the above steps again.
*Measuring spoon is not shown
Fig.2
