7
DISMANTLING & INSTALLING LID:
3.
How to dismantle/remove the lid:
When the lid (2) of the cooker is in the upright vertical
position (Figure 7), hold the lid with both hands, and adjust the height between the Lid and
the upper edge of the cooker to approximately 10cm (Figure 8). Then turn it counter-
clockwise until you reach the Closed Lid position (Figure 9). In order to remove the lid, you
will need to move in an upward direction (Figure 10).
4.
How to install the lid:
Hold the Lid (2) with both hands at the Closed Lid position and pull
it upwards in a slanted position which leads to a height of 10cm between the Lid and the
upper edge of the cooker (Figure 11). Align the Lid’s Sliding Valve (7) to the pressure
cooker’s Lock-Slider (6) and turn it in a clockwise direction until you reach the Opened Lid
position (Figure 12). The lid will be installed when the lid is seated and in the horizontal
position (Figure 13).
TIP:
Position the lid above the unit with the open hinge latch positioned right above the
hinge bar. Then firmly push down on the lid to snap it into position. Slide the lid left and right
to ensure a smooth connection.