PARTS INDICATOR
To Assemble
WARNING: To avoid damage to the product or serious personal injury:
Do not activate or plug the product into an electrical outlet until the product is
completely assembled.
The Blades of the product are very sharp; handle with care.
1. Ensure the product is unplugged from the electrical outlet.
2. Place the Motor Housing on a flat, stable surface.
3. Wash and dry the Jar.
4. Ensure the Plastic Ring is attached around the Spin Base.
5. Insert the Blades and Spin Base into the bottom of the Jar and turn clockwise (follow
the arrows inscribed on the bottom of the Spin Base) until the plastic latches of the
Jar bottom and the Spin Base lock into place.
6. Place the Jar onto the Motor Housing ensure the Motor Drive Coupling and the
fittings located on top of the Motor Housing are aligned.
7. Twist the Jar counterclockwise until the plastic latches of the Jar and the Motor
Housing lock into place.
NOTE:
Ensure the arrow below the Jar handle is aligned with the arrow below the
plastic latch of the Motor Housing.
8. Place the Plastic Lid on top of the Jar and secure it into position.
NOTE:
The Jar handle has a slide release mechanism to hold the Plastic Lid to the
Jar. Make sure the Plastic Lid is always securely in place on top of the Jar before
operating the product.
HOW TO USE
1. Wash the ingredients you want to blend and cut them into pieces small enough to fit
into the Plastic Lid Feeding Hole.
2. Once cleaned and cut, add the ingredients into the blender through the Plastic Lid
Feeding Hole.
NOTE:
The Jar has a six cup (48 oz. / 1.5 liter) capacity. Do not overload the Jar
with ingredients.
3. After filling the Jar with ingredients, secure the Plastic Lid with Feeding Hole into
position. Plug the product into a standard 120-volt AC electrical outlet.
4. Push the desired blender speed button (e.g., CHOP, PUREE).
CAUTION:
Never operate the product’s motor for more than a few minutes at a time.
Select and depress a blender speed button, allow the motor to cool for a few seconds;
then press the blender speed button again until you achieve the desired results.
5.
To turn off the product, press the “OFF” Button on the 10-Speed Control Panel.
6. Unplug the product from the electrical outlet when finished blending ingredients,
when the product is not in use, or if leaving it unattended.
CAUTION:
Do not use the product for blending heavy foods or thick mixtures.
NOTE:
The PULSE Button can be used for more control during short processing jobs to
run the blender motor at a high speed. When finished processing ingredients with the
PULSE Button feature, release the PULSE Button to turn off the product.
1. Plastic Lid with Feeding Hole
2. 48oz. Jar
3. Plastic Ring
4. Blades and Spin Base
5. Motor Drive Coupling
6. Motor Housing
7. 10-Speed Panel Control
