410-795-8368 6335 S. Carroll Park Drive, Sykesville, MD 21784
Step 6: Wrap black strap around the outside of
the inflation tube and feed the end of the strap
through the metal teeth of the clip.
VERY IMPORTANT
-Step 7: Pull strap
until it is tight. If the strap is not tight enough
it will separate from the blower and come off.
It is very important to check the strap after the
bounce is fully inflated to make sure it is still
on the blower securely.
VERY IMPORTANT:
Step 8: Fold the extra
inflation port in half and wrap black strap
around the outside of the extra inflation tube
and feed the end of the strap through the metal
teeth of the clip. Pull strap until it is tight. It is
very important to check the strap after the
bounce is fully inflated to make sure it is still
on tightly.
Step 9: Hook-up 50' extension cord
(DO NOT
ADD ADDITIONAL CORDS)
to the blower
and turn the blower switch on. The bounce
will take few minutes to fully inflate.
The
blower needs to be turned on the entire
time to keep the bounce inflated.
Do not operate the bounce in winds over 25
miles an hour.
