Rev. 110719-AZ
3
www.elitescreens.com
Connect the
IR Eye Receiver (E)
to the
Wall Box (G)
for high wall or ceiling installations.
Wall Box (G)
IR Remote (A)
IR Eye Receiver (E)
5. 5-12 volt trigger (Item E, Fig 3):
The built-in 5-12V trigger input allows your screen to synchronize its drop
& rise with the projector’s power cycle. The screen deploys when the projector powers up and will retract when
the projector powers down. The 5-12 volt RJ45 cable connects to your projector’s trigger output via a separate
cable that may or may not be provided by the manufacturer of the projector. The trigger feature will not work
without an output cable from the projector, but it can be tested by connecting the Red (+) and Green (-) cable to
a 9-volt battery.
12 Volt Trigger (Item, E)
Connect the
12 Volt Trigger (E)
to the
Wall Box (G)
for set up to your projector.
6. Wireless 5-12 volt trigger (Item F, Fig 4):
The RF remote control serves as a dual purpose,
independently as a handheld remote control, or in
conjunction with the Wireless 5-12 volt trigger cable. The
radio frequency technology can be programmed to send a
wireless signal to synchronize its drop/rise with the
projector’s power cycle.
DC
5-12V
out
The back of the
projector
Wireless5-12V trigger cable
UP
Stop
Down
Fig. 4
5-12 Volt Trigger Cable
–
3.5mm to USB
Fig.2
