Rev. 121119-BR
2
2.
Next, lift the screen up while simultaneously opening the frame legs. Ensure the legs are locked in
place by pressing down on the hinges near the bottom-center of each leg. Two people are needed for this
step.
(Fig.2)
3.
Slowly lift the additional back-leg and connect it using the knob screw as shown on
Fig.3
.
4.
Lastly, make sure your screen is secure and stable. Make any adjustments if needed. The installation is now
complete.
Note: Refer to Yard Master 2 User Guide for additional steps on securing your screen.
Disassembly
1.
Remove ropes and stakes from the ground, if needed, then unlatch the
hinged support bars on front side of each leg so that it is bent. Fold that
half of the legs up for the next step.
2.
Slowly lower the screen to the ground (towards the closed legs). Two
people are needed for this step.
3.
Unlatch the hinged support bars and fold down other half of the
legs. Remove knob screws before proceeding.
4.
Remove the legs from the folding frame. To continue with
disassembly of your screen, refer to the full user guide.
Fig.2
Fig.3
