Rev.062215-EA
2
www.elitescreens.com
Installation Warning
The instructions provided in this user’s guide are for reference only. Regardless of the mounting method, the
screen should be securely supported so that vibrations or pulling on the viewing surface will not cause the
casing to become loose or fall. The installer must insure that proper mounting hardware and fasteners are
used to provide adequate strength suitable for the installation. Elite Screens is not liable for any faulty
installations. For vertical limit adjustment instructions, please contact our Technical Support Department at
(877) 511-1211 Ext. 604.
Individual modifications to this product are prohibited and will void the warranty with the manufacturer.
Please contact Elite Screens Customer Service for any questions.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
Reorient or relocate the receiving antenna of the device which may be casing the interference.
Increase the separation between the screen and the device’s receiver.
Connect the equipment into a different power outlet other than the device.
Pre-Installation
1.
Carefully unpack the screen.
2.
Always handle the screen in a leveled position on a clean surface.
3.
In order to protect the screen from exposure to stains, keep the screen out of contact with foreign
particles such as dust, sawdust, and/or liquids.
Accessories for VMAX Tab-Tension Dual Series
Please make sure all accessories listed below are included before proceeding.
Red + Green -
E. 5-12v
trigger cable
A. IR Remote
B. RF Remote
C. 3-way wall
switch
D. IR eye
receiver
F. AAA batteries
