PRODUCT WHITE PAPER
P
www.elitescreens.com
Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp.
Elite Screens Japan | Elite Screens Australia
10
Press “UP” button on the RF remote to retract the screen into the housing.
2. Wireless 5-12 volt trigger operation
The
VMAX Dual
may be controlled through a projector’s 5-12 volt trigger through the Radio Frequency remote
control. It will synchronize with the projector’s power cycle and
deploy
the
16:9 screen
when the projector is turned
on
and
retract
it when the projector is powered
off
.
Plug the 5-12 volt trigger cable as shown below and turn on your projector.
If the
16:9 screen
does not deploy, try the following steps to reprogram the RF remote to your VMAX Dual.
Step 1
: Make sure to unplug your screen from the power outlet
Step 2
: Hold the
UP
button on your RF remote
Step 3
: While holding the
UP
button, plug the screen back to the power outlet
Step 4
: Wait 5 seconds and then release the
UP
button
Step 5
: The RF remote should now be programmed with your screen and ready to synchronize with your projector’s power
cycle
Repeat the steps again if unsuccessful.
Note: The projector’s on/off cycle may take longer to fully activate. It typically takes anywhere from 20-30
seconds for full off/on cycle to function each time.
2.35:1 screen
retracts
16:9 screen
deploys
