051319-BR
3
Tripod Screen Material Disassembly
1.
Disconnect the projection screen from the tripod support and place it on a clean surface with the
projection side facing up.
2.
Slowly roll-up the screen material until it is fully rolled as shown below.
3.
Make sure to tie the material using the Velcro straps attached.
4.
Next, fold the tripod legs into position to put away.
Hanging the screen material to the wall
1.
Mark the location of where the screen is going to be installed.
2.
Use a nail or self-tapping screw for the wall.
3.
Hang the projection screen by the material handle onto the nail or screw.
For a local Elite Screens contact or Technical Support, please visit
