12052022JA
1
www.elitescreens.com
Spectrum Tab-Tension 2 CineGrey 3D
®
Series
Ceiling/Ambient Light Rejecting (CLR®/ALR)
Electric Projector Screen
For standard long throw projectors
User’s Guide – H Type
V1
Thank you for choosing the
Spectrum Tab-Tension 2
CineGrey 3D®
Series projection screen!
The screen material
included is our
award winning GREENGUARD GOLD and ISF Certified CineGrey 3D®
which is a front
projection material, precisely formulated for environments with minimal control over room lighting. It was designed
to
enhance picture brightness
,
offer accurate color fidelity
, and
improve contrast levels
. The
CineGrey 3D®
is best
for family rooms, educational facilities, conference rooms, house of worship or any applications in which incident
light is a factor.
Compatible only with standard long throw projectors.
In order for the
CineGrey 3D®
to maintain its projection qualities and optimum performance please refer to the list
below for proper maintenance and cleaning.
•
Use a dry microfiber cloth to remove dust from the screen’s surface.
•
When cleaning, use a damp microfiber cloth with warm water to remove any marks.
•
Never rub or apply pressure when cleaning the surface.
•
Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
•
In order to avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any
other sharp or abrasive objects.
Important Safety Precautions
Make sure to read this user’s guide and follow the procedure
s below prior to screen operation.
•
Please retain this user’s guide for future reference.
•
To avoid damaging the unit, do not use with any accessories/triggering sources not recommended or
specified by the manufacturer.
•
Handle the unit carefully during transportation to avoid any damages.
•
To ensure safe and reliable operation, direct connection to a` properly grounded power source is advised.
•
The power outlet supplying power to the unit should be close to the unit and easily accessible.
•
Do not install the unit on uneven or inclined surfaces.
•
Do not hang any objects on the power cord and position the cord properly to avoid tripping over it.
•
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit.
•
There are no user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No one
except authorized technicians can open the casing and make repairs to this unit.
•
Make sure that the power source this unit is connected to has a continuous power flow.
•
If there is need for use of an extension cord, make sure the cord has an equal rating as the electrical device
to avoid overheat.
•
Do not handle the power cord when your hands are wet or your feet are in contact with water.
•
Unplug the power cord during extreme weather conditions such as heavy rain, gusty winds, thunder or
lightning.
•
Avoid direct Sunlight, moisture/rain to this unit.
•
Do not mount near high temperature environments to prevent this device from overheating.
•
Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be
done with any other electrical household appliance.
•
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious
damage or if there are any evident broken parts.
WARNING
