11092020JA
U-00199
6
Installation
Step 11
:
Measure the overall length and
height of the frame and drill holes for the top
brackets. Line up the wall brackets with the
drilled holes on the installation location and
screw them in using a Phillips screwdriver. If
not installing into a structural wood stud, use
a hollow wall anchor then screw in the M5x50
wood screws with a screwdriver. Make sure
the brackets are leveled.
Step 12:
Position the fixed frame screen onto the top wall brackets as shown below and push down at the center
of the top of the frame to secure.
Step 13:
With the frame slightly tilted outward; connect the bottom brackets onto the bottom groove of the frame.
Slowly return the screen to a normal upright position. Once the screen is flush to the wall, secure the brackets to
the wall with a screw. If not installing into a structural wood stud, mark the sites where the hollow wall anchors
will be placed using the same instructions above. With the wood anchor installed, repeat the process and fasten the
brackets with the M5x50 wood screws.
For Technical Support or an Elite Screens contact in your area,
visit
e.
k.
f.
