070114-ESA
www.elitescreens.com
2
3) Insert the support bar behind the screen and then
connect the rod sections so that it is at maximum
length.
4) Ground the net base with the stakes.
Disassembling the screen
1) Step on the back end of the screen and bring
middle part of screen or net base towards you
approximately 12” from your foot and hold that
down stepping on it with your other foot.
3) Bring the right side in toward your left foot and
bring the left side towards your right foot.
2) While holding the material down with both feet,
lean forward and grab the left and right side.
4) With your feet in position, bring both left and
right sides in towards the ground.
Support
Bar
Connector
Support Bar
Screen
Net Base
Stake
Stake
12”
Screen
Screen
1
2
Screen