Installation
1. Mark the area from the screen mount end cap hole to the wall. Then mount the
screen onto the wall (Fig 1)
•
Locate stud on wall or and mount the screen on the desired location.
•
If the stud cannot be found on the dry wall, we recommend using hollow
wall anchors (can be typically purchased at a local hardware store) for
screens weighing less than 40lbs.
2. You can also hang the screen on a ceiling by using a chain and connecting it to
the two hanging loops located on each end of the case as depicted on the diagram.
(Fig 2)
This feature available on “U”
and “X” series models only.
This type of installation can be performed
with “L” wall brackets and are included
on applicable models.
Rev 1.1
