PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Back of end cap
Front view
NOTE:
Regardless of mounting method, the screen should be securely supported so that vibration or even
abusive pulling on the viewing surface will not cause the case to work loose or fall. The installer
must insure that the fasteners used are of adequate strength and suitable for the mounting surface
chosen.
4.2
Installation
Flush Wall Mounting
1.
Mark the location of where the screen is to
be installed for the pre-drilled hole.
2.
After marking the area and drilling the hole,
insert the proper screw into the drilled
hole and leave about 1/8” of an inch
from the wall to mount the screen.
3.
Mount your screen from the keyhole located on
back of screen’s left and right end cap.
Ceiling Mounting
(additional hardware required)
Optional installation using a chain to hang the screen from
the ceiling.
1. You can also hang the screen on a ceiling by
using a chain (not included) and hang it by the
two loops located on each end of the case.
4.3
Screen Operation
Note: Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the
screen to touch the screen case when the screen goes up or comes down to avoid damaging the
screen material.
